WPS (Wi-Fi Protected Setup) is a feature that allows you to easily connect the camera to the gateway.
The following requirements must be met:
- Supported Router* with WPS functionality
- Current camera firmware
- SH01: Version 1.19(0001.0001.330.0) or later
- SH02: Version 1.6(0002.0001.949.0) or later
- NG07: Version 1.13(0003.0001.940.0) or higher
- NG10: Version 1.5(0004.0001.937.0) or higher
*) Supported routers:
- TP-LINK WR940N
- Linksys WRT1200AC V2
- ASUS AC1900
- LINKSYS WHW03 V2
- TP-link M4
Please refer to the router's manual for detailed information on linking devices using WPS.