During your first installation please follow the introduction guide displayed on the mobile application step by step carefully!
The Motion detection sensor that is used to detect motion in an area in front of it. Detection range is up to 5 meters from the 0° center and up.
How to Pair (only briefly, for more details please refer to the instructions shown on the mobile application during the pairing process)
- In your mobile app, make sure the gateway is in pairing mode by going to Sensors -> Motion -> Add new sensor.
- Remove the back cover, and insert the batteries provided.
- Press the button on the the back once (button next to batteries).
- Wait for the LED to stop blinking.
- Tap the next button in your mobile app.
- Give your sensor a name.
- If the pairing fails then please try again.
Placing
- It is not recommended to place the sensors in places where the temperature is expected to be bellow -10°C or above 50°C.
- Face the front of the sensor in the direction where the motion should be detected.